Date:         Fri, 31 May 2002 11:27:03 -0700
Reply-To:     "Huang, Ya" <ya.huang@PFIZER.COM>
Sender:       "SAS(r) Discussion" <SAS-L@LISTSERV.UGA.EDU>
From:         "Huang, Ya" <ya.huang@PFIZER.COM>
Subject:      Re: SAS Win2k/V8.2, How to change the default options settings?
Comments: To: William Lu <luwp@hotmail.com>
Content-Type: text/plain; charset="iso-8859-1"

It is weird! I tried uncheck and check it again, still does not
work. Wei Cheng also tried and got the same conclusion as mine.

Does anybody else mind to try and let me know?

Thanks.

Ya

-----Original Message-----
From: William Lu [mailto:luwp@hotmail.com]
Sent: Friday, May 31, 2002 11:17 AM
To: Huang, Ya
Subject: Re: SAS Win2k/V8.2, How to change the default options settings?


Hi Ya,
"Save the setting on exit" works for me, on WIN2K server/V8.2.
My suggestions is uncheck it, OK and check it again. It is microsoft.
Regards,William
SAS Administrator,
Canadian Institute for Health Information (CIHI),
90 Eglinton Avenue East, Suit 300,
Toronto, ON M4P 2Y3
Tel: (416) 481-2002 ext. 3582
Fax: (416)481-2950
wlu@cihi.ca
----- Original Message -----
From: "Huang, Ya" <ya.huang@pfizer.com>
To: "'William Lu'" <luwp@HOTMAIL.COM>
Sent: Friday, May 31, 2002 1:29 PM
Subject: RE: SAS Win2k/V8.2, How to change the default options settings?


> Like I said in my initial post, I already checked it, but
> it won't save the settings.
>
> -----Original Message-----
> From: William Lu [mailto:luwp@HOTMAIL.COM]
> Sent: Friday, May 31, 2002 10:09 AM
> To: SAS-L@LISTSERV.UGA.EDU
> Subject: Re: SAS Win2k/V8.2, How to change the default options settings?
>
>
> tools -> preference ->general ->check "save the settings on exit"
> "Huang, Ya" <ya.huang@PFIZER.COM> wrote in message
> news:6300328FB7CFD511AACF0002A589357D024C83A1@lajgrdexm04.agouron.com...
> > Hi Wei,
> >
> > That was the only session. But I didn't use -rsasuser option.
> > It sounds like I have to put all these options in the config
> > file, isn't it?
> >
> > Ya
> > -----Original Message-----
> > From: WCheng@isisph.com [mailto:WCheng@isisph.com]
> > Sent: Friday, May 31, 2002 9:00 AM
> > To: Huang, Ya; SAS-L@LISTSERV.UGA.EDU
> > Subject: Re: SAS Win2k/V8.2, How to change the default options settings?
> >
> >
> >
> > Hi Ya,
> >
> > Was the SAS session you changed the option the first or only one that
you
> > opened? and do you use the -rsasuser option when you start your SAS
> session?
> >
> >
> > Wei
> >
> >
> >
> > "Huang, Ya" <ya.huang@PFIZER.COM>
> > Sent by: "SAS(r) Discussion" <SAS-L@LISTSERV.UGA.EDU>
> > 05/31/02 08:00 AM
> > Please respond to "Huang, Ya"
> >
> >         To:        SAS-L@LISTSERV.UGA.EDU
> >         cc:
> >         Subject:        SAS Win2k/V8.2, How to change the default
options
> > settings?
> >
> >
> >
> > Good morning,
> >
> > I tried to change some default options settings, such as
> > forchar, center to nocenter etc., this is what I did:
> > go to "tools" -> "options" -> "Sytem ..." ->
> > "Log and procedure output control" -> "Procedure output" ->
> > modify center=1 to center=0. This only works for the
> > current SAS session, once I quit SAS and start it again,
> > it go back to the default settings, even though I already
> > checked "Save settings on exits".
> >
> > Thanks
> >
> > Ya Huang
>