Date: Wed, 8 Aug 2001 09:31:44 +0200
Reply-To: Van Dooren Wim <Wim.Van.Dooren@ARTESIASERVICES.BE>
Sender: "SAS(r) Discussion" <SAS-L@LISTSERV.UGA.EDU>
From: Van Dooren Wim <Wim.Van.Dooren@ARTESIASERVICES.BE>
Subject: Re: IntrNet V8.2
Content-Type: text/plain; charset="iso-8859-1"
* Have you checked the parameters passed with the _debug=131 ? Might give
some usefull info ...
* what do you see in the service-log ? Are there any calls made ??
* are you calling correct sas-session ?
* check the broker.cfg and the sas-pgm to start the proc appsrv ....
* have you pinged in dos to the server and does that give a timeout ?
I suppose that somewhere there has to be a small configuration issue ...
good luck
Wim Van Doren
Solid Partners
Belgium
-----Original Message-----
From: Greg [mailto:g.becquembois@ABS-TECHNOLOGIES.COM]
Sent: 08 aug 2001 09:17
To: SAS-L@LISTSERV.UGA.EDU
Subject: Re: IntrNet V8.2
Hi don,
All logs are ok and i have the timeout message pinging the server !!!
Everything was OK in 8.1...it's strange.
Greg
<don.henderson@US.PWCGLOBAL.COM> a écrit dans le message news:
OF3AF0224D.5C2B43F5-ON85256AA1.005A7FF5@us.pw.com...
> Greg,
>
> Have you tried to run the ping program to see if your App Server is
> running? It might be a problem with the program you are running in 8.2.
>
> Have you checked the log that the application server writes?
>
> The fact that this program timed out does not provide the details needed.
> And, depending on what the program does, it may be that IntrNet and the
> program are fine but that the request is taking longer that the default
> timeout.
>
> -don henderson
>
>
>
>
>
> Greg <g.becquembois@ABS-TECHNOLOGIES.COM>@LISTSERV.UGA.EDU> on 08/07/2001
> 12:02:07 PM
>
> Please respond to Greg <g.becquembois@ABS-TECHNOLOGIES.COM>
>
> Sent by: "SAS(r) Discussion" <SAS-L@LISTSERV.UGA.EDU>
>
> To: SAS-L@LISTSERV.UGA.EDU
> cc:
> Subject: IntrNet V8.2
>
>
> hi,
>
> I just have installing SAS 8.2 and SAS intrnet does not work ....it was ok
> with 8.1
> my os is win2000
>
> here is the log in the browser :
> Timeout error
> The program ran longer than its allotted timeout period (60 seconds). This
> could happen if the timeout is too short, if the server is unavailable or
> busy, or there was an error invoking the SAS server. Note: program may
> still
> be running.
>
>
> ----------------------------------------------------------------
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you
received
> this in error, please contact the sender and delete the material from any
> computer.
| 
