Date: Thu, 30 Mar 2000 10:19:22 +0200
Reply-To: CICS List <CICS-L@LISTSERV.UGA.EDU>
Sender: CICS List <CICS-L@LISTSERV.UGA.EDU>
From: Booysen Corneel <BooysenC@SAPS.ORG.ZA>
Subject: Re: DTCN debugging tool.
Content-Type: text/plain; charset="iso-8859-1"
Hmmmm,
Are you sure the CICS setup is correct ?
Make sure that the EQAWLECS job has been run to link the modules.
Also make sure that the EQACCSD member is used to create
the csd entries and then include the SEQAMOD library in the rpl.
Start the DTCN transaction.
The easiest setup is to leave the screen as is and press F4.
Once the profile is saved - leave DTCN with F3 and execute the
transaction of the program that was compiled.
The pds we are using is : FBA with lrecl 133 and blksize any multiple of
lrecl.
Regards.
Corneel.
> ----------
> From: Ashan D'souza[SMTP:ash@CHENNAI.TCS.CO.IN]
> Reply To: CICS List
> Sent: Thursday, March 30, 2000 9:53 AM
> To: CICS-L@LISTSERV.UGA.EDU
> Subject: Re: DTCN debugging tool.
>
> corneel,
> either i am blind or dumb or both. i did all that was instructed. i
> saw
> the jump in loadmod size and am still not able to get any debug screens.
> is my
> assumption that i will get a screen like the code/370 one correct.
> further is
> the listing to be a flat fb/80 or pds fb/80? awaiting help.
>
> ash.
>
>
>
>
> Booysen Corneel <BooysenC@SAPS.ORG.ZA> on 03/29/2000 07:59:29 PM
>
> Please respond to CICS List <CICS-L@LISTSERV.UGA.EDU>
>
> To: CICS-L@LISTSERV.UGA.EDU
> cc: (bcc: Ashan D'souza/Support/TCSCHENNAI)
>
> Subject: Re: DTCN debugging tool.
>
>
>
>
> Hi,
>
> The easiest way is to compile with the test option on the
> compile step. Also point the sysprint dd of the compile
> step to a PDS or sequential file.
>
> In the link step include EQADCCXT which should be in the
> SEQAMOD library.
>
> When you new the program in CICS you will notice that
> the load module has a massive increase in size. (I mean huge !!)
>
> Then execute DTCN and set the profile on.
> When you debug the program - the debugger will pick up the
> library where you stored the source from the load module.
>
> Regards.
> Corneel.
>
> > ----------
> > From: Ashan D'souza[SMTP:ash@CHENNAI.TCS.CO.IN]
> > Reply To: CICS List
> > Sent: Wednesday, March 29, 2000 2:21 PM
> > To: CICS-L@LISTSERV.UGA.EDU
> > Subject: Re: DTCN debugging tool.
> >
> > hello,
> > could sbd pl explain as to how to use the listings file inorder to
> > enable
> > debugging.
> > ash.
> >
> >
> >
> >
> > Booysen Corneel <BooysenC@SAPS.ORG.ZA> on 03/29/2000 12:05:25 PM
> >
> > Please respond to CICS List <CICS-L@LISTSERV.UGA.EDU>
> >
> > To: CICS-L@LISTSERV.UGA.EDU
> > cc: (bcc: Ashan D'souza/Support/TCSCHENNAI)
> >
> > Subject: Re: DTCN debugging tool.
> >
> >
> >
> >
> > Hi all,
> >
> > Sorry if I created some confusion with me calling it the "LE Debugger".
> > It is a bad habit that a few of us here in South Africa has got into.
> > The official name as far as could determine is the IBM Debug Tool.
> > The name IBM COOPERATIVE DEVELOPMENT ENVIRONMENT/370 ( CODE/370 )
> > also crops up in some documentation.
> >
> > If you order COBOL/MVS (390) full function, or I believe C/C++ full
> > function
> > it comes
> > with - and as far as I know - the debugger is for free.
> >
> > Regards.
> > Corneel.
> >
> > > ----------
> > > From: Sam Butters - ATCX[SMTP:SButters@MAIL.MARICOPA.GOV]
> > > Reply To: CICS List
> > > Sent: Tuesday, March 28, 2000 6:01 PM
> > > To: CICS-L@LISTSERV.UGA.EDU
> > > Subject: Re: DTCN debugging tool.
> > >
> > > I just searched the OS/390 2.7 LE bookshelf for this "DTCN" and didn't
> > > find
> > > any reference to it. In which version of LE is DTCN for???
> > >
> > > > -----Original Message-----
> > > > From: Booysen Corneel [SMTP:BooysenC@SAPS.ORG.ZA]
> > > > Sent: Tuesday, March 28, 2000 6:03 AM
> > > > To: CICS-L@LISTSERV.UGA.EDU
> > > > Subject: Re: DTCN debugging tool.
> > > >
> > > > It is the LE debugger I sent mail about yesterday.
> > > >
> > > > > ----------
> > > > > From: Chase, John[SMTP:jchase@USSCO.COM]
> > > > > Reply To: CICS List
> > > > > Sent: Tuesday, March 28, 2000 3:02 PM
> > > > > To: CICS-L@LISTSERV.UGA.EDU
> > > > > Subject: Re: DTCN debugging tool.
> > > > >
> > > > > I just installed TS 1.3, and don't find a DTCN transaction
> anywhere
> > in
> > > > the
> > > > > CSD... What is it supposed to do?
> > > > >
> > > > > -jc-
> > > > >
> > > > > On Tuesday, March 28, 2000 4:42 AM, John Hirst
> > > > > [SMTP:John.Hirst@TNTPOST.COM]
> > > > > wrote:
> > > > > > We are going to be upgrading to TS 1.3 shortly and I have been
> > > looking
> > > > > at
> > > > > > the
> > > > > > DTCN transaction that comes free with it. We currently use
> > > > > > Xpediter/CICS as a
> > > > > > debugging tool. Has anyone had any problems using DTCN? Does
> > this
> > > > > > make
> > > > > > Xpediter redundant or is DTCN not all it is cracked up to be?
> > > > > >
> > > > > > Thanks in advance
> > > > > >
> > > > > > John
> > > > > >
> > > > > >
> > > > > > ~#~
> > > > >
> > >
> >
>
| 
